PART-SVN82C-EN
Appendix C
Configuration View Items
Unit type tab
The figure below shows the TechView™ screen for selecting unit type. Default
values for Starter Only control are shown in the accompanying table. Options for
other selections are also shown in the table. Stand Alone Starter should be selected.
Make note of selections in the space available here and in the following tables.
Figure C1. Unit type configuration tab screen
Table C1. Unit type configuration choices
Parameter
Recommended value
Unit Type (MODL)
Stand Alone Starter
Control Sequence
1
Note: Entered values may differ from the recommended value depending on the
specific control scheme on your chiller. In most cases, the recommended value will
be adequate.
Other options
Entered value
CVRD
none
1
20