Troubleshooting; Suspension And Steering - Toro Workman MDE 2008 Service Manual

Troubleshooting

Suspension and Steering

Problem
Front end is noisy.
Rear end is noisy.
Excessive steering play.
Front end shimmies.
Vehicle is unstable or wanders.
Workman MDE
Possible Cause
Front wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Front end components are loose or worn.
Steering gearbox is damaged or worn.
Rear wheel lug nuts are loose.
Transaxle problem (see Chapter 4 -- Transaxle and Brakes).
Front wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Steering linkage is loose or worn.
Tie rod ends are loose or worn.
Steering gearbox is damaged or worn.
Front wheel lug nuts are loose.
Front wheel bearings are loose or worn.
Front wheel alignment (toe--in) is incorrect.
Steering linkage is loose or worn.
Tie rod ends are loose or worn.
Bushings in A--arm are worn.
Tire pressure is low or uneven between tires.
Wheel lug nuts are loose.
Front wheel bearings are loose.
Front wheel alignment (toe--in) is incorrect.
Steering column bushings are worn.
Bushings in A--arm are worn.
Steering gearbox is damaged or worn.
Page 5 - - 3 Chassis