Bluetooth Setup; Bluetooth Setting - Kenwood KDC-6047U Instruction Manual

Function of KDC-BT60U
KDC-6047U with KCA-BT200 (Optional Accessory)

Bluetooth Setup

MENU VOL
4 38 ¢

Bluetooth Setting

You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
KDC-BT60U
Press the [ ] button.
KDC-6047U
Press the [TI] button for at least 1 second.
✍ You can also select from "Settings" in Menu List
mode.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "BT Settings".
3
Select the Menu item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
"BT Settings"
"Phone Selection" Select a cell-phone or Bluetooth audio player
connection.
"Audio Selection"
Refer to
Wish to Connect> (page
"SMS Download" Download a short message.
Refer to
"SMS inbox" Display the received short message.
Refer to
(page
"Voice Tag" Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
- Adding a Voice Dialing Command (page 50)
- Setting a Voice Command for Category (page
50)
"Detailed Setup" Move to detailed item.
"Device Regist. " Register a Bluetooth device (pairing).
Refer to
"SPCL DVC
(page
Select"
"Device Delete" Cancel registration of the Bluetooth device.
Refer to
device> (page
"PIN Code Edit" Specify the PIN code required when registering
this unit using the Bluetooth device.
Refer to
46
|
KDC-BT60U/ KDC-6047U
/ TI
<Selecting the Bluetooth device You
48).
<Downloading the SMS> (page
<SMS (Short Message Service)>
52).
<Registering Bluetooth device>
47).
<Deleting a Registered Bluetooth
49).
<Registering PIN Code> (page 48).
"Auto Answer" Answer a call automatically after lapse of the
"Bluetooth HF/
Audio"
"Call Beep"
"BT F/W Update" Display the version of the firmware of this unit.
"Mic Gain"
"NR Level"
"Echo Cancel LV" Adjust the level of echo cancellation. Setting to
4
Make a setting
• When the "
right edge of the display)
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
• When the "
Press the [4] or [¢] button to select a
52).
setting value.
5
Exit BT Settings mode
KDC-BT60U
Press the [
KDC-6047U
Press the [TI] button for at least 1 second.
Remarks
• "Auto Answer" (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
"OFF" : Does not answer the phone call automatically.
"0" : Automatically answers the phone call at once.
"1s" – "99s" : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
preset time interval for automatic answer.
"OFF"/ "0s" – "8s" – "99s"
You can specify output speakers for hands-free
voice communication and Bluetooth audio
sound.
"FRONT": Outputs voice from the front
speakers.
"ALL": Outputs voice from the front and rear
speakers.
You can output a beep from the speaker when
a call comes in.
"ON": Beep is heard.
"OFF": Beep is canceled.
Adjust the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to "+" increases the voice volume.
"–3" – "0" – "+3"
Reduce the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to "+" increases the
noise reduction.
"–3" – "0" – "+3"
"+" increases the echo cancel reduction.
"–2" – "0" – "+2"
( : Factory setting)
" icon is displayed (at the
PUSH
" icon is not displayed
PUSH
] button.