Dsp Setup; Car Type Selection; Speaker Setting - Kenwood KDC-6047U Instruction Manual

DSP Setup

SRC MENU VOL
4 ¢

Car Type Selection

You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types.
Display Overview
"OFF" Not compensating.
"Compact" Compact car
"Sedan" Sedan
"Wagon" Station wagon
"Minivan" Minivan
"SUV" Sport-utility vehicle
"Passenger Van" Passenger van
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Cabin select mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Detailed Setup"
4
Select the car type
Press the [4] or [¢] button.
5
Set the value
Press the [VOL] button.
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
⁄
• You can compensate the distances in more details by
using <Car Type Fine Adjustments> (page 41)
40
|
KDC-BT60U/ KDC-6047U
( : Factory setting)
>
"Car Type".
function.

Speaker Setting

The speaker X'Over is automatically set when the
position and size of each speaker are selected from
the following items.
Speaker Item Range
"Front" "SIZE" Speaker Size Front
"O.E.M.", "10cm", "13cm", "16cm",
"17cm", "18cm", "4x6", "5x7", "6x8",
"6x9", "7x10"
"LOCATION" Speaker Location Front
"Door", "On Dash", "Under Dash"
"TWEETER" Speaker Size Tweeter
"None", "Use"
"Rear" "SIZE" Speaker Size Rear
"None", "O.E.M. " , "10cm", "13cm",
"16cm", "17cm", "18cm", "4x6", "5x7",
"6x8", "6x9", "7x10"
"LOCATION" Speaker Location Rear
• "Door", "Rear Deck"
• "2nd Row", "3rd Row" (Car Type:
"SubWoofer" "SIZE" Speaker Size Subwoofer
"None", "16cm", "20cm", "25cm",
"30cm", "38cm Over"
1
Select the source
Press the [SRC] button. Turn the [VOL] knob and
press it when the desired item is displayed.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Pressing the [SRC] button
repeatedly switches source.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Speaker setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Detailed Setup"
4
Select the item you want to set
Operation type
Selects the item.
Adjust each item.
Set the value
5
Exit Audio Control mode
Press the [MENU] button for at least 1 second,
and then press it again briefly.
"Minivan", "Passenger Van")
( : Factory setting)
>
"Speaker".
Operation
Turn the [VOL] knob.
Press the [4] or [¢] button.
Press the [VOL] button.