Table of Contents
Advertisement
4 Installation
4.2
Software installation (download)
This chapter describes the steps for the installation of the example code.
Note
The software examples are available on the HTML page from which you
downloaded this document.
The software examples are always assigned to the components used in the set
and show their basic interaction. However, they are no real applications in the
sense of a technological problem solution with definable properties.
Download file
Table 4-2
No.
1
23753479_Set23_RegSim_V23.zip
Installation of the LOGO!Soft Comfort Program
Table 4-3
No.
1.
Load the example project
23753479_Set23_RegSim_V23.zip
into a separate folder.
2.
Extract the files into a separate folder.
3.
Start LOGO!Soft Comfort V7.
4.
Open the file
23753479_Set23_RegSim_V23.lsc
with the menu: "File -> Open...
5.
Make sure that the PG interface is in the same IP
band, analog to the other Ethernet nodes.
6.
Set the IP address of the LOGO! in LOGO!Soft
Comfort:
Follow the menu path: "Tools > Options > Interface.
Create a new interface by means of the "Add" button,
or modify an existing interface by means of the "Edit"
button.
Set the address as shown in the screenshot and
save the settings with OK.
Set23_RegSim
Entry ID: 23753479,
V2.3.S,
Zip-file name
Action
02/2014
Contents
LOGO!Soft Comfort V7 – Program
23753479_Set23_RegSim_V23.lsc
STEP 7 V12 – Program
23753479_Set23_RegSim_V23.ap12
Comments
In the "unpacked folder" 01_LOGO!
Can be set via "PC Control Panel > Network
and Sharing Center"
e.g. IP addr.192.168.000.010 and
subnet mask on 255.255.255.0
16
Advertisement
Table of Contents
