Dualit 72960 Manual page 9

KNOW YOUR SCREEN
CURRENT WATER
TEMPERTURE
WATER IS
BEING HEATED
MUTE IS
ACTIVATED
HEATING WATER
BEFORE FIRST USE: FILL TO THE MAX MARKER, BRING TO THE BOIL BY
SELECTING 100°C/212°F, THEN DISCARD WATER. REPEAT THIS PROCESS
TWICE.
Note: Power Base controls will not operate if the kettle is not placed on the Power Base.
3.A
Ensure the kettle is filled with
water, lid firmly in place and
sat on the Power Base. Save
energy, only heat what you
require. Ensure Spout is not
close to or facing the user, or a
wall/cabinet.
TARGET
WATER
TEMPERTURE
SET
HOLD
HOLD
TIMER
3.B
Plug in, the Start/Stop Button
will illuminate.
9
SET
HOLD
KETTLE IS NOT ON
THE POWER BASE
3.C
Press the Start/Stop Button, the
Screen will illuminate and display
current water temperature and
the set temperature. Note: If
kettle is not correctly fitted to
the power base or removed at
this point, the Screen will look
like this.
SET
HOLD