Advertisement
Available languages
Available languages
CARE AND CLEANING
Before cleaning the appliance, always disconnect the plug of the power cord from the mains
socket and let it cool down properly.
WARNING:
DO NOT SPLASH WATER OR ANY OTHER
LIQUID ONTO THE KETTLE OR ANY OF ITS PARTS OR
ACCESSORIES.
DO NOT WASH THE KETTLE, BASE, MAINS CORD
AND PLUG UNDER RUNNING WATER AND DO NOT
IMMERSE THEM IN WATER OR ANY OTHER LIQUID.
Do not use sharp objects, chemicals, thinners, petrol or other similar substances. Never clean the
plate warmer with a steam appliance.
Cleaning the outer case KETTLE
To clean the kettle's outer surface, please use a damp cloth; to polish, use a dry cloth.
The base heating element is made of high grade stainless steel. Brown stains that may appear
during use are mineral deposits from the boiled water. This is no corrosion in any case.
Removing mineral deposits
Tapped water may contain minerals that may deposit inside the kettle and water gauge and
lead to colouration after some time. To remove the deposits, proceed as follows:
1. Fill your kettle to 2/3 of its level with 1 portion of vinegar and 2 portions of water. Boil the
solution and leave stand in the cattle overnight.
2. Empty your kettle and then boil clean water twice. The kettle is then ready for further use.
Storage
Before storage, make sure that the kettle is turned off , clean and dry. Check that the lid is
closed properly. Wrap the cord around the bottom of the base. Store your kettle in a vertical
position and never put anything on the lid.
NOTE
NOTE
12
CARE AND CLEANING
Advertisement
