Advertisement
Available languages
Available languages
WARNING
THIS APPLIANCE HAS BEEN DESIGNED ONLY
FOR BOILING DRINKING WATER. DO NOT USE THIS
APPLIANCE FOR BOILING LIQUIDS OTHER THAN
WATER. BEFORE TURNING THE KETTLE ON, ALWAYS
MAKE SURE THAT THE LID IS FIRMLY CLOSED.
DO NOT OPERATE THE LID OPENING BUTTON WHILE
THE WATER IS BEING HEATED OR WHEN THE HEATING
IS FINISHED. THIS COULD CAUSE THE WATER TO
SPLASH OUT. BEFORE OPENING THE LID, PLEASE
EMPTY THE KETTLE.
Protection against empty operation
The kettle is equipped with a safety device to protect it against damage by overheating and
operating with insuffi cient amount of/without water. If you turn the kettle on by mistake with
insuffi cient amount of water/no water inside, the safety device will cut off the power supply
circuit automatically and turn the kettle off when a certain temperature is reached. You cannot
turn the kettle back on at this moment. Set the switch to the off position and allow the kettle
to cool down before fi lling.
The kettle can be turned back on once it has cooled down. The safety device will reset
automatically. In order to increase the safety, the kettle is equipped with an additional thermal
fuse. Should the safety device fail with subsequent overheating, the kettle will automatically
and irreversibly turn off to prevent further damage. Should such condition occur, please
contact an authorised service centre.
11
OPERATING YOUR KE 3010 KETTLE
Advertisement
