Advertisement
Available languages
Available languages
OPERATING YOUR KE 3010 KETTLE
Before fi rst use
Before fi rst use, remove all packaging and advertising labels / stickers from the appliance.
Before using the kettle for the fi rst time, allow the kettle to boil clean water. Fill the cattle with
clean water, bring to a boil and then pour the water out. Repeat this procedure 3 to 4 times.
The kettle is then ready for use. Your kettle will only operate correctly if placed on its base
connected to an electric outlet and if the power button is in the on position. As soon as the
water boils, the kettle will switch off automatically.
Using your kettle
1. To fi ll the kettle with water, remove it from the base and press the button to open the lid.
Fill the kettle with the required amount of water. Do not fi ll the kettle below the minimum
or above the maximum level mark. Lack of water would lead to turning the kettle off
before boiling. If the kettle is overfi lled, the boiling water might splash out.
2. Closed lid and make sure it's fi rmly secured. Place the kettle on its base. Insert the mains
cord plug into a power socket.
3. Set the power switch to the on position. The power switch will be underlit when turned
on.
Never fi ll the kettle if it is located on the base. Do not fi ll the kettle below the minimum or above the
maximum level mark. Lack of water would lead to turning the kettle off before boiling. If the kettle
is overfi lled, boiling water may splash out.
This kettle should be used only with the supplied base. When pouring out water from the kettle, be
careful to avoid scalding with hot water. Do not pour water too fast.
4. As soon as the water boils, the kettle will switch off automatically. The switch
underlighting will go out. Take the kettle from the base and pour water in cup, mug or
other container. To boil water repeatedly, it's necessary to wait a few seconds for the
heating element to cool down.
Do not start or use the kettle without water. Incorrect use of the appliance may negatively
aff ect its lifetime.
If the kettle is not to be used, unplug the power cord from the socket. You may store the kettle
on the base if it's not to be used.
NOTE
10
OPERATING YOUR KE 3010 KETTLE
Advertisement
