Maintenance Instructions; Cleaning Tips - Kärcher K 2.27 User Manual

CARE AND MAINTENANCE
INSTRUCTIONS
Cleaning the water inlet filter
STEP 1:

Disconect the connector from the
water inlet.
STEP 2:

Pull out water inlet filter with flat-nose
pliers.
STEP 3:

Rinse out water inlet filter in warm
water.
STEP 4:

Reinsert water inlet filter into the wa-
ter inlet.
Maintenance
The unit is maintenance-free.
10 English

CLEANING TIPS

CAUTION
Before cleaning any surface an in-

conspicuous area should be cleaned
to test spray pattern and distance for
maximum cleaning results.
If painted surfaces are peeling or

chipping, use extreme caution as
pressure washer may remove the
loose paint from the surface.
When using on surfaces which might

come in contact with food, flush sur-
faces with plenty of drinking water.
For additional cleaning tips and a

complete video library, visit our web-
site:
www.karcherresidential.com
Deck Cleaning
(with or without detergent). Pre-rinse
deck and surrounding area with fresh
water. If using detergent, apply to sur-
face at low pressure. For best results,
limit your work area to smaller sections
of approximately 25 square feet. Allow
detergent to remain on surface 1-3 min-
utes. Do not allow detergent to dry on
surface. Rinse at high pressure in a long
sweeping motion keeping the spray noz-
zle approximately 3-6 inches from the
cleaning surface. Always clean from top
to bottom and from left to right. When
moving on to a new section of the clean-
ing surface, be sure to overlap the previ-
ous section to eliminate stop marks and
ensure a more even cleaning result.
House Siding
(with or without detergent). Pre-rinse
cleaning surface with fresh water. If us-
ing detergent, apply to surface at low
pressure (for best results, limit your
work area to sections of approximately
6 feet and always apply detergent from