Table of Contents
Advertisement
Winterizing & Long Term
Storage
1. Disconnect all water connections.
2. Turn on the machine for a few
seconds, until the water which had
remained in the pump exits, turn off
immediately.
3. Do not allow high-pressure hose to
become kinked.
4. Store the machine and accessories in
a room which does not reach freezing
temperatures. DO NOT store near
furnace or other sources of heat as it
may dry out the pump seals.
Failure to follow the above
directions will result in damage to
the pump assembly and accesso-
ries and will void the warranty.
Kärcher also recommends the
regular practice of using a pump
protector like "Kärcher Pump
Guard" to prevent cold weather
damage during storage in the
winter months.
12 English
Maintenance Instructions
Cleaning the Water Inlet
1. Disconnect the connector from the
water inlet.
2. Rinse out the water inlet filter in warm
water.
3. Thread the connector into the water
inlet.
Maintenance
This unit is maintenance free
Cleaning Tips
●
Before cleaning any surface an
inconspicuous area should be
cleaned to test spray pattern and
distance for maximum cleaning
results.
●
If painted surfaces are peeling or
chipping, use extreme caution as
Filter
Hide quick links:
Advertisement
Table of Contents
