Summary of Contents for Aqua Exclusive DRUM FILTER C-25 EVO
Page 1
Aqua Exclusive™ DRUM FILTER C-25 EVO OWNER’S MANUAL www.aqua-exclusive.com - www.aqua-exclusive.com - www.aqua-exclusive.com - www.aqua-exclu...
Page 2
SAFETY INFORMATION The Drum Filter C-25 EVO Manual is also available online. To download or view the manual, you can also go to www.aqua-exclusive.com/drum-filter-c-25-evo. For more information about our company, you can go to www.aqua-exclusive.com/about-us. If you have any questions or concerns about your filter, you can call to +316-2515-7626, email to support@aqua-exclusive.com or start a live chat at www.aqua-exclusive.com.
Safety & Requirements FUNCTION The Aqua Exclusive Drum Filter C-25 EVO is an modern and very effective all in one filter system. Connecting separate filter equipment is a thing of the past. The C-25 EVO is made for (koi) ponds, (large) aquariums and fish farms.
Aqua Exclusive Filter Overview Figure 1: Front and side view of the Drum Filter C25 EVO. 1. Drum filter by-pass caps 10. Spray bar 2. Air hose tank transit 11. Filter panel 3. Drum filter controlbox 12. Filter panel clambs 4.
Page 6
Aqua Exclusive Filter Overview Figure 2: UV-C System overview Power Plug USA Rubber O-Ring B Ballast 40W High Output Bulb Tank transit connector Bulb Connector Rubber O-Ring A Threaded Connector Ring Quarts sleeve C-25 EVO OWNER’S MANUAL...
Page 7
Aqua Exclusive Filter Overview Figure 3: Controlbox overview Manually Rinsing Button Water Pump Power Socket UV-C Power Socket Drum Motor Power Socket Rinse Pump Power Socket Fuse 2 Fuse 1 Controlbox ON/OFF Switch Controlbox Power Plug DMX connector water level sensor\...
Page 8
This also depends on your flow and how many microns your filter panel is. We supply the drum filter C-25 EVO with a 70 micron filter panel as standard, which we also recommend this for koi ponds.
Page 9
Aqua Exclusive Filter Overview UV-C SYSTEM The C-25 EVO is equipped with our newest UV-C technology. A 40watt UV-C system with high output uv lamp is build inside the filter underneed the drum.This means that UV equipment in your pipe system can be dispensed with, which promotes optimal flow. The sophisticated design and high quality materials produce a high UV-C radiation.
Aqua Exclusive Setup Installation Before starting the installation of the C-25 EVO you need to know which setup you are go- ing to use. The C-25 EVO can be used for both a gravity and pump fed setup. We will explain the two main systems below.
Page 11
Aqua Exclusive Pump Fed Figure 4: Overview of gravity setup. Figure 5: Overview of pump fed setup. Setup...
Aqua Exclusive Water Level Sensor Location of the Water Level Sensor You might have to reposition the water level sensor based on which setup you will be using. The filter comes standard with the water level sensor next to the drum, this is for the gravity setup.
Put the UV bulb in the UV connector and put the UV connector in the transit connector. Step 6: Tighten the threaded connector ring properly. Fixed is fixed, do not turn the ring too far! Figure 7: Steps to connect the UV-system to the Drum Filter C-25 EVO. Installation...
Aqua Exclusive Connect filter Connect filter We recommend to use flexible couplings between the filter and the pvc pipes, see figure 8. Figure 8: Flexible coupling Filter outlet 4” (110mm) Flexible Coupling 4” (110mm) PVC Pipe C-25 EVO OWNER’S MANUAL...
Aqua Exclusive Rinse Pump Installing the Rinse Pump • It is important, however, that high-pressure hose/PVC pipe is used for this purpose. • The pump generates a pressure of 3 bar. Pressure peaks of 4 bar may occur during start- up.
Aqua Exclusive Water Level WATER LEVEL 1. Remove the cover of the housing and check that the float (figure 6) is in the lower position. (If you are using a pump fed setup you have to reposition the water level sensor, see page 8 and 10 for more information) 2.
Aqua Exclusive Controlbox Controlbox 1. Connect the plugs of the devices to the appropriate sockets on the control box, see figure 2. Insert the power plug of the control box (5) in the appropriate socket and switch on the system by toggling the switch (9).
Aqua Exclusive Maintenance Maintenance & Disassembly The device requires maintenance at least once a month. During maintenance the power sup- ply must be disconnected. The screen panel should be checked for wear and tear. 1. Disconnect the power supply and close the piping.
Aqua Exclusive Replacing Filter Panel Replacing Filter Panel Once you have established that the screen panel is showing wear, it is important that you replace it with a new screen panel as soon as possible. This will ensure the continued optimal performance of the filter.
Page 20
Aqua Exclusive™ Publication date: March 21, 2021...
Need help?
Do you have a question about the DRUM FILTER C-25 EVO and is the answer not in the manual?
Questions and answers