Directory Input; Settings; Set Ring Melody For Contact - Eaton FernTel IP4 User Manual

5.1.2.1 Directory input

The directory input dialog is used to create a new contact or to edit an existing contact.
Subscriber:............ Input parameter to specify the subscriber's name, under which the entry will be included in the
Number: .............. Input parameter to specify the subscriber number and the optional DTMF characters, which are
1)
Name: ................ Input parameter to specify the subscriber's name, which manages the dialling information instead of the
1)
Settings............... Opens the settings dialog in which the ring melody behavior for the subscriber's calls can be set.
Delete ............... Deletes the current entry from the contact list.
2)
To specify the dialling information, either the input parameter Number or the input parameter Name must be used.
1)
The Delete command is only available if directory input was used to edit an existing contact.
2)
After you have made your specifications, press the menu key
appears.

5.1.2.1.1 Settings

Dialog settings to set the ring melody signaling (ringing) that is to be used when the subscriber indicated in the contact's
Subscriber input parameter calls.
Ringing:............... Selection parameter for switching ringing on/off.
On
Off
Ring melody:........... Opens the ring melody dialog, in which the melody, volume and speed of the ring melody signaling
Registration:.......... Opens the registration dialog, in which nothing can be set.

5.1.2.1.1.1 Set ring melody for contact

Dialog settings to set the ring melody signaling (ringing) that is to be used when the subscriber indicated in the contact's
Subscriber input parameter calls.
Start | Stop........... Setting variable for starting and stopping the ring melody generator. Press the
Melody:................ Selection parameter to specify the ring melody.
Default
3tone 1 – 3tone 3
2tone 1 – 3tone 5
tone 1 – tone 2
ringer
Vol:................... Selection parameter to set the volume.
Def
1 - 11
Max
Speed:................. Selection parameter to set the playback speed
Def
1 - 5
Max
32 USER MANUAL FERNTEL IP4 / IP160 March 2022 www.eaton.com
alphabetically ordered contact list. The input field is located in the line below the designation
Subscriber.
transferred to the destination phone after successful connection. The optional DTMF characters are to be
placed after the subscriber number, separated by a comma.
4711
// Subscriber number
4711,*101#
// Subscriber number with following DTMF characters transmission
number (e.g. subscriber designation within the PBX used).
The acoustic ring melody signaling (ringing) is switched on.
The acoustic ring melody signaling (ringing) is switched off.
(ringing) can be set.
 5.1.2.1.1.1 Set ring melody for contact Page 32
of the set ring melody and press it again to stop playback.
Default melody
Triad tones 1-3
Two tones 1-5
Single tones 1-2
Ringer
Default volume
Volume levels 1-11
Maximum volume
Default playback speed
Playback speed 1-5
Maximum playback speed
as many times as necessary until the text message Entry saved
key to start playback