Replacing Ribbon Cartridge - Pyramid 3800 User Manual

AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 3800

REPLACING RIBBON CARTRIDGE

For optimum performance, replace ribbon cartridge every 6 months.
C
F
A – Ribbon Cartridge C – Tab
B – Clips
Use only genuine Pyramid product part #43079 Replacement Ink Ribbon Cartridge.
1
Unlock and remove the time clock cover.
2
Prior to removing old ribbon, slide "SET" switch to the right. CAUTION: Do not
3
attempt to change the ribbon when in operation mode, as this may result in injury.
To remove old ribbon, pull two clips
4
cartridge, pull straight up using tab
5 Remove new ribbon cartridge from packaging and turn the manual ribbon advance
knob clockwise to straighten ribbon.
E
Holding tab
6
lower the ribbon in front of the ribbon guide
retaining pins
Gently push down cartridge until it snaps into carriage while turning the manual
7
ribbon advance knob clockwise.
Turn manual ribbon advance knob clockwise a few rotations to ensure ribbon is
8
positioned correctly in front of print head.
Slide "SET" switch to the left.
9
Replace the cover and lock unit.
10
11
Feed a time card through unit to test print quality.
pyramidtimesystems.com
D – Ribbon Guide F – Retaining Pins
install ribbon cartridge into print carriage, making certain to
C
are within clips
F
B
E - Manual Advance Knob
towards you and simultaneously lift ribbon
B
located on top of cartridge.
C
first, then make certain
D
(see diagram).
B
REPLACING RIBBON CARTRIDGE
A
D
E
13