Wall Mounting - Pyramid 3800 User Manual

AUTO TOTALING TIME CLOCK INSTRUCTIONS
Model 3800
DESKTOP SET UP
1
Remove time clock from carton and place on a flat, level surface.
2
Plug unit into AC wall outlet.

WALL MOUNTING

1 Select a location convenient to employees
clocking IN and OUT. Be sure power outlet is
within 4 feet of mounting location.
Use masking tape to hold mounting template
2
(located on last page) on wall, making certain
template is positioned so bottom of time clock
is approximately 45 inches from floor.
3
Drill holes using template as a guide.
4 Remove template from wall and install #10
screws, leaving approximately 3/16 inch of screws
exposed. For sheetrock walls, use plastic anchors.
Hang time clock on wall, aligning keyholes on the
5
rear with screw heads. Press downward on time
clock until it lowers onto screws.
Plug unit into AC wall outlet.
6
It is recommended to remove the clock from
7
bracket to complete programming set up which
begins on page 5.
4 WALL MOUNTING
Model 3800
888.479.7264