Devolo MAGIC 2 LAN Triple Manual page 29

29 Configuration
Powerline domain name
The Powerline domain name determines the name
of your PLC network.
Unpairing – Resetting or removing an adapter
from a network
1
To remove a devolo Magic adapter from your
devolo Magic network, click Leave Powerline
network.
2
Wait until the PLC LED flashes white and then
disconnect the devolo Magic adapter from the
mains supply.
Compatibility mode
Using as VDSL connection may negatively impact
the performance of the bandwidth connection by
crosstalk of the signal.
In order to mitigate any potential negative effects
the device provides the following options:
devolo Magic 2 LAN triple
Automatic compatibility mode
If the option Automatic compatibility mode (re-
commended) is enabled, the device can automati-
cally adjust the output signal to avoid interference
as much as possible. This option is configured by
default.
Manual compatibility mode
If an interference has not been eliminated despite
activating the automatic setting, please disable it
and set the compatibility mode as well as the signal
transmission profile manually:
b
MIMO
a
Full power
a
VDSL 17a (default)
a
VDSL 35b
b
SISO
a
Full power
a
VDSL 17a (default)
a
VDSL 35b
Get in touch with your internet provider to
find out which signal transmission profile is
the best option for your internet connection.
The MIMO operating mode and the VDSL 17a si-
gnal transmission profile are configured by default.