Adjusting The Flow; Selecting Your Outlet - Elisa intuition User Manual

Adjusting the Flow

From the Home screen you
can adjust the flow during
showering, by moving the
lever left or right.*
FLOW FEEDBACK DISPLAY
MED MAX
Flow Flow
After adjusting the flow, the display will return to the temperature
Home screen after a few seconds.
Note: the change in flow will vary depending on the water system
pressure and the configuration of the pipework. For further information,
refer to the trouble shooting section and the Important Information
section in the Smart Shower Installation Guide.
Emergency Stop: When the flow setting is at ECO, joggle the lever
down 3 times in succession to turn the shower off.
*Flow cannot be adjusted when in Settings mode, or when the shower is awake
and not flowing.
8
39

Selecting your Outlet

Divert models only
From the Home screen, you
can alternate between outlets
by pushing and holding the
lever for over 3 seconds and
releasing when the desired
outlet icon appears. This can
be done upon starting the
shower, or during showering.
Push and hold for
over 3 seconds
OUTLET ICONS
By default your
controller will show the
Shower icon as the
primary outlet and the
Drench icon as
secondary. To change,
go to Settings menu,
Configure Outlets
(page 14).
Release lever when
desired outlet icon appears
Drench
Shower
9