Time Search - JVC DX-T5 Instructions Manual

A-B Repeat
1 While playing, display the on-screen bar with the pull-
down menu.
2 Select .
3 Display the pop-up window.
Dolby D
DISC 1 TITLE
DVD-VIDEO
3/2.1ch
TIME TIME OFF OFF CHAP.
OFF
4 Select "A-B".
Dolby D
DISC 1 TITLE
DVD-VIDEO
3/2.1ch
TIME TIME OFF OFF CHAP.
A–B
5 Select the start point (A).
DVD-VIDEO
ENTER
TIME
TIME
• After selecting the starting point (A), you can search for
the end point using ¡.
6 Select the end point (B).
A-B Repeat starts. The selected
portion plays repeatedly.
ENTER
To cancel A-B Repeat, repeat steps 1 to 3, and select "OFF"
in step 4.
To erase the on-screen bar
ON
SCREEN
TOTAL 1:01:58
TITLE 2 14 CHAP CHAP 3 23 TOTAL 1:25:58
1/3 1/3 1/3
1/3 1/ 3 1/1
TITLE 2 14 CHAP CHAP 3 23 TOTAL TOTAL 1:01:58 1:25:58
1/3 1/3 1/3
1/3 1/ 3 1/1
Dolby D
14
DISC 1 TITLE TITLE 2 CH
3/2.1ch
1/3
A- CHAP. 1/3
OFF

Time Search

You can move to a particular point by specifying the elapsed
playing time from the beginning.
1 While playing (without PBC for SVCD/VCD), display
the on-screen bar with the pull-down menu.
• Except for DVD: Time Search can be used before
starting playback.
2 Select .
3 Display the pop-up window.
Dolby D
DVD-VIDEO
3/2.1ch
TIME TIME OFF OFF
TIME _ : _ _ : _ _
4 Enter the time.
You can specify the time in hours/minutes/seconds.
1 2 3
4 5 6
C
7 8 9
10 0 +10
• It is always required to enter the hour digit (even "0"
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
• To correct a misentry, press cursor 2 to erase the last
entry.
5 Finish the setting.
ENTER
To erase the on-screen bar
ON
SCREEN
23 TOTAL 1:01:58 1:25:58
DISC 1 TITLE TITLE 2 14 CHAP CHAP 3 TOTAL
1/3 1/3 1/3
CHAP. 1/3 1/ 3 1/1
Examples:
To move to a point of 1 (hours):
02 (minutes): 00 (seconds), press
1, 0, 2, 0, then 0.
To move to a point of 54
(minutes): 00 (seconds), press 0,
5, 4, 0, then 0.
The System starts playing from the
specified time.
25