Adjustable Backlight - La Crosse Technology C75747-AU Setup Manual

Power Up
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the USB Cord into a USB Power Adapter (not included), be sure
the adapter is securely plugged into a working outlet. Then insert the
Power Jack end into the back of the station.
Optional: Insert 2 AA batteries for backup.
3. Once the sensor is reading to your station, place it outside in a shaded
location to protect it from the sun's heat.
Watch our sensor mounting video:
Outdoor Sensor
TX141TH-Bv3

Adjustable Backlight

• When operating with the USB Cord, press the
backlight (4 brightness levels, plus an off option).
• When operating on battery power alone, press any button to light up the
display for 10 seconds.
bit.ly/th_sensor_mounting
AA
AA
AA
Weather Station
C75747-AU
LIGHT button to adjust the
2