Table of Contents
Advertisement
Pressure / Extra Sensor Area
Pressure
Your Relative Pressure reading will come from your station's internal barometer.
Allow up to 10 days for automatic calibration. Or you can program your local
pressure value in the Settings Menu. The arrows on the left represent rising and
falling tendency.
Extra Sensors
The station can display extra data from three additional Temperature and
Humidity Sensors, as well as one Rain Sensor.
Pressure (default)
Add Extra Sensors
1. Install batteries into your extra sensor(s).
Note: For Temp/Humidity sensors, be sure to select different channels (1,2,3)
before you insert batteries.
2. Hold the EXTRA button on the station until the Reception Indicator
to animate. This will start a search for your sensors.
3. Your sensor(s) should connect within the next few minutes. Press the EXTRA
button to cycle through Extra Sensor and Pressure data. The Auto Scroll Icon
will appear when activated.
Rain
Temperature/Humidity
starts
7
Advertisement
Table of Contents
