Motorola WAVE TLK 100i User Manual page 18

MN005652A01-AK
Chapter 3 : Getting Started
Prerequisites:
Ensure your radio is in the User Mode and has no internet connection.
NOTE: The following are the preconfigured Wi-Fi Access Point settings supported by the radio.
SSID
WaveRadio
Procedure:
To connect to the PWAP, press the Menu/ Programmable button and Volume Up button
simultaneously.
If the radio successfully connects to the PWAP, your radio shows the following indications:
• A positive tone sounds.
• The display shows PWAP for 2 seconds.
Radio downloads the provisioned Wi-Fi Settings from the server and overwrites the preconfigured
Wi-Fi setting.
NOTE: The preconfigured Wi-Fi setting is cleared when the radio is rebooted or when the Wi-Fi
is disabled.
18
Password
RadioManagement