Battery Installation; Battery Notice - VTech Global Greetings Fundamentals of Learning Manual

GLOBAL GREETINGS™ BATTERIES GLOBAL GREETINGS™ GLOBAL GREETINGS™
GLOBAL GREETINGS™ GLOBAL GREETINGS™

BATTERY INSTALLATION

BATTERY INSTALLATION BATTERY INSTALLATION BATTERY INSTALLATION BATTERY INSTALLATION
1. Make sure the unit is OFF.
2. Locate the battery cover on the back of the unit. Use a
coin or screwdriver to remove the battery cover.
3. Insert 2 new "AA" (UM-3/LR6) batteries following the
diagram inside the battery box. (The use of new, alkaline
batteries is recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure
the battery cover.

BATTERY NOTICE

BATTERY NOTICE BATTERY NOTICE
BATTERY NOTICE BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the learning toy when it will not be
used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• Do not short circuit the supply terminals.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES. WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES. WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES. WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
BATTERIES BATTERIES BATTERIES
BATTERIES
6