Resetting The Rear Partner Display And Speakers; Completely Resetting The Vibe 10 - Jabbla Vibe 10 Operating Instructions Manual

Vibe 10
Carry out one of the following actions to wake Vibe 10 from sleep mode:
•
Press the on/off button (9).
•
Touch the wake-up sensor (2) with your thumb or finger.
NOTE
These options are available as standard in Windows 11. Advanced Windows 11 users can change these settings via
Device Manager.
9

Resetting the rear partner display and speakers

NOTE
It is also possible to completely reset the Vibe 10 (see
CAUTION
A reset is only permitted if the partner display and/or the speakers are completely unresponsive.
Figure 13: Reset button
Press the tip of a ballpoint pen into the reset opening (18).
The display and speakers are switched off. Restart the partner display and speakers and they are ready for use.
10

Completely resetting the Vibe 10

NOTE
If only the partner display and/or the speakers are not responding, you can reset these separately (see
rear partner display and speakers
CAUTION
Only completely reset the device, if the Vibe 10 has completely frozen.
E Control
16
9 Resetting the rear partner display and speakers
Completely resetting the Vibe 10
on page 16)
on page 16).
Resetting the