Table Of Contents; Symbols; Safety Warnings - Festool TPC 18/4 Original Instructions Manual

English
Contents
1 Symbols..................................................... 14
2 Safety warnings.........................................14
3 Intended use..............................................17
4 Technical data........................................... 18
5 Parts of the device.....................................18
6 Battery pack.............................................. 18
7 Commissioning..........................................19
8 Settings......................................................19
9 Tool holder, attachments..........................19
10 Working with the electric power tool........20
11 Warning signals.........................................21
12 Service and maintenance..........................21
13 Environment.............................................. 21
14 General information.................................. 21
15 Contact us..................................................22
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Wear protective gloves when changing
tools and working with raw materials.
Inserting the battery pack.
Remove the battery pack.
Hold in this position.
Only assemble by hand!
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section 14.1
14
Tip or advice
Handling instruction
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
Keep work area clean and well lit. Clut­
a.
tered or dark areas invite accidents.
Do not operate power tools in explosive
b.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while
c.
operating a power tool. Distractions can
cause you to lose control.
2 ELECTRICAL SAFETY
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or groun­
ded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an in­
creased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet
c.
conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of elec­
tric shock.
e. When operating a power tool outdoors,
use an extension cord suitable for outdoor