Dismantling The Cartridge - Brady M211 User Manual

Dismantling the Cartridge

To dismantle the cartridge:
1. Using the flathead screwdriver, pry off the smart cell on the bottom of the cartridge by placing
the screwdriver blade under a corner of the smart cell and lifting up.
The chip is glued on and should release fairly easy.
2. Starting at the narrow end of the cartridge, insert the flathead screwdriver into the seam of the
cartridge, then twist the screwdriver slightly to loosen the two outside pieces of housing.
Repeat at various points around the seam.
M211 User Manual
Setup
Recycling the Cartridge
13