Related Manuals for JVC HR-1080-PRO
Summary of Contents for JVC HR-1080-PRO
- Page 1 JVC HR-1080-PRO Video Processor User Manual Document No. MKT-0027-UMN-1.002F JVC Inc.
- Page 2 MKT-0027-UMN-1.002F JVC HR-1080-PRO Video Processor User Manual Copyright and Trademark Information Portions copyright © 2005 Silicon Optix Inc All Rights Reserved. Portions of the information contained in this document are protected by worldwide copyright. All rights are reserved by Silicon Optix Incorporated.
-
Page 3: Table Of Contents
JVC HR-1080-PRO Video Processor User Manual Table of Contents 1 Preface...4 1.1 Limited Warranty (To be customized by JVC) ... 4 1.2 Related Documents... 4 1.3 FCC Statement ... 5 1.4 Safety... 5 2 Introduction...8 2.1 General Description... 8 3 Installation...12 3.1 List of Standard Components ... -
Page 4: Preface
1.1.1 Return Material Authorization (RMA) (TO BE CUSTOMIZED BY JVC) In the event that a product needs to be returned for repair, call your closest JVC office and ask for an Applications Engineer to issue a Return Material Authorization number. -
Page 5: Fcc Statement
JVC HR-1080-PRO Video Processor User Manual MKT-0027-UMN-1.002F FCC Statement Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential/office installation. - Page 6 MKT-0027-UMN-1.002F JVC HR-1080-PRO Video Processor User Manual cautions in this User Guide, as well as the following safety suggestions. To prevent electric shock or injury, follow these safety instructions in the installation, use, and servicing the unit. 1.4.2 Installation Attachments - Do not use attachments not recommended by the manufacturer, as they may result in the risk of fire, electric shock, or injury to persons.
- Page 7 JVC HR-1080-PRO Video Processor User Manual Power Cord Protection - Route power supply cords so that they are not likely to be walked on or pinched by placing items upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.
-
Page 8: Introduction
MKT-0027-UMN-1.002F JVC HR-1080-PRO Video Processor User Manual 2 Introduction General Description The JVC HR-1080-PRO (see Figure 1) is a high performance video signal processor intended as a comp... - Page 9 The JVC HR-1080-PRO offers access to a truly wide range of signal inputs – everything from SDTV (composite, S-Video and component) to HD-SDI and all popular video and computer graphics signals in between (including analog RGB, DVI, and HDMI) may be selected as inputs.
-
Page 10: Features And Specifications
• Fully-automatic cadence detection and correction • Detail Enhancement • Advanced motion-adaptive de-interlacing Control IR Remote Control RS-232 USB (for connection to Crestron / AMX boxes) Ethernet Page 10 JVC HR-1080-PRO Video Processor User Manual horizontal, +/- 30 vertical) JVC Inc. - Page 11 Dimensions: 17.0” x 9.7” x 1.75” (43.2 x 24.6 x 4.4 cm) Weight : 7 lbs. (3.2 kg) Power: 100-240V, 47-63 Hz, 72W Panel Diagrams Figure 3: JVC HR-1080-PRO Front Panel Drawing Figure 4: JVC HR-1080-PRO Rear Panel Drawing JVC Inc. MKT-0027-UMN-1.002F Page 11...
-
Page 12: Installation
The Power switch may be left on in normal operation. The On/Setup button on the front panel may be used to put the unit into a low-power state (Setup Mode). NOTE: When the JVC HR-1080-PRO is in Setup (Stand-by) Mode, the output to the projector or panel is temporarily suspended. - Page 13 5. Return JVC HR-1080-PRO to Operate Mode by pushing the On/Setup button on the front panel or the Power button on the IR Remote. This activates the JVC HR-1080-PRO output circuits. Further adjustments may be made using the JVC HR-1080-PRO OSD (On Screen Display).
-
Page 14: Jvc Hr-1080-Pro User Interface
MKT-0027-UMN-1.002F 4 JVC HR-1080-PRO User Interface IR Remote Control All JVC HR-1080-PRO user interface controls are accessed via infrared (IR) remote control. The remote has three groups of controls: a) OSD Navigation (including the Operate/Setup Key), b) Video Source Selection, and c) HQV Feature Selection. -
Page 15: Jvc Hr-1080-Pro Operational Modes
JVC HR-1080-PRO Operational Modes The JVC HR-1080-PRO has two operational modes, Operate and Setup. These modes are selected by a dedicated key on the IR remote. The JVC HR-1080-PRO also enables selection of the Operate Mode with RS-232, USB, or Ethernet. - Page 16 JVC HR-1080-PRO Please Wait In Operate Mode, the video output signals are activated and you may control all of JVC HR- 1080-PRO parameters with the remote control (except for Setup restricted parameters, as noted below). The LCD front panel display indicates the following information in its 24 x 2 character...
- Page 17 The default parameters configurations are highlighted in bold. JVC Inc. Table 1: Setup Parameters Description Cycles through all of the available JVC HR-1080-PRO Table 2 output modes (see Resolutions). Turns On (Off) the 24 x 2 LCD Display during Operate...
- Page 18 MKT-0027-UMN-1.002F Table 2: JVC HR-1080-PRO Output Modes Output Mode VGA 60 Hz (640 x 480) VGA 50 Hz (640 x 480) 848 x 480 60 Hz SVGA 60 Hz (800 x 600) SVGA 50 Hz (800 x 600) 720p 60 Hz (1280 x 720)
- Page 19 JVC HR-1080-PRO Video Processor User Manual MKT-0027-UMN-1.002F leftmost octet. The Up/Down keys may then be used to increase/decrease the value of the octet. Subsequent presses of the Left/Right key will highlight the octet immediately to the left/right. The Up/Down keys may then be used to increase/decrease the value of the octet. When the leftmost/rightmost octet is selected, an additional Left/Right key selection will “exit”...
-
Page 20: On Screen Display
S/PDIF Audio as Audio input. All other Factory Default parameters are indicated in Table 4. When the user selects the Factory Reset from the OSD menu, the JVC HR-1080-PRO reloads all of these default parameters, replacing any adjustments previously made. Certain parameters are not affected by the Factory Reset and are left in their most recently selected position. - Page 21 JVC HR-1080-PRO Video Processor User Manual Icon Descriptio Advanced Table 4: OSD Complete Menu Structure OSD Menu Level Level 1 Level 2 Component Video S-Video Composite Audio Inputs -100 - +100, Audio Delay 0 (default) Picture Picture Brightness Settings Contrast JVC Inc.
- Page 22 Level 1 Level 2 Sharpness Picture Picture Settings Enhancement Gamma Color Temp Page 22 JVC HR-1080-PRO Video Processor User Manual Level 3 Level 4 0 - 100, 50 (default) Detail 0 - 100, 50 (default) Gamma 1.0 (default) Gamma 1.5 Gamma 2.2...
- Page 23 JVC HR-1080-PRO Video Processor User Manual OSD Menu Level Level 1 Level 2 Input Reset Standard (default) Aspect Picture Ratio Full Screen JVC Inc. Level 3 Level 4 Confirm YES/NO Crop MKT-0027-UMN-1.002F Comments Level 5 Returns all of the adjustments for a single input to the Factory Default state.
- Page 24 Picture Anamorphic Aspect Ratio Flexview Picture Position Horizontal Autosync Sync Page 24 JVC HR-1080-PRO Video Processor User Manual Level 3 Level 4 Vertical 0 - 100 0 - 400 0 - 200, Clock (default) Comments Level 5 – Grayed out, no action See section 5.2 for more...
- Page 25 JVC HR-1080-PRO Video Processor User Manual OSD Menu Level Level 1 Level 2 Overscan Picture Overscan Top Left Top Right Menu Position Bottom Left Bottom Right Setup Test Patterns Trigger A 12 V Triggers Trigger B Factory Reset YES/NO Language...
- Page 26 Revision Standby Micro Rev. # Horizontal Advanced Projection and Vertical Page 26 JVC HR-1080-PRO Video Processor User Manual Level 3 Level 4 Top Left H Comments Level 5 Selects the language for the OSD menus Shows the source resolution Shows the source H frequency...
- Page 27 JVC HR-1080-PRO Video Processor User Manual OSD Menu Level Level 1 Level 2 Keystone Advanced Horizontal and Vertical Keystone Projection Projection Mounting HQV On (default) Video Processing Mode HQV Off (Bypass) (default) HQV Film Mode Default for HDMI, Component, Composite, S-Video, and SDI inputs.
- Page 28 MKT-0027-UMN-1.002F OSD Menu Level Level 1 Level 2 Dark Scene Bright Scene Graphics JVC HR-1080-PRO Video Processor User Manual Level 3 Level 4 Cinema Vivid Comments Level 5 Provides Luma processing optimized for movies; expands video range signals. Enhances color, expands video range signals.
- Page 29 The special case of 1280 x 1024 SXGA (an aspect ratio of 5:4) on output is treated as if it were 4:3. The output of a 1280 x 1024 display will be slightly distorted; circles will appear to be vertically oriented ovals. Since the JVC HR-1080-PRO is intended for Widescreen processing, the 1280 x 1024 SXGA is not a frequently encountered case.
-
Page 30: Aspect Ratio
• Flexview: intended to handle the specific case of a 4:3 input aspect ratio and 16:9 output aspect ratio Table 5 to Table 8 present the five aspect ratio treatments over the four different combinations of Input Aspect Ratio and Output Aspect Ratio. Page 30 JVC HR-1080-PRO Video Processor User Manual JVC Inc. - Page 31 JVC HR-1080-PRO Video Processor User Manual Table 5: Aspect Ratio Treatments for 4:3 Input with 4:3 Output OSD Menu Name Standard Full Screen Crop Anamorphic Flexview JVC Inc. Description 4:3 input signals shown full screen on 4:3 output display Grayed out. No action.
- Page 32 Full Screen Crop Anamorphic Flexview Page 32 JVC HR-1080-PRO Video Processor User Manual Description 4:3 input signals are shown in a pillar box on the 16:9 output display 4:3 input is linearly stretched horizontally to fill the 16:9 screen Top and bottom of image are cropped...
- Page 33 JVC HR-1080-PRO Video Processor User Manual Table 7: Aspect Ratio Treatments for 16:9 Input with 4:3 Output OSD Menu Name Standard Full Screen Crop Anamorphic Flexview JVC Inc. Description All HDTV inputs are assumed to be 16:9. HDTV input signals...
- Page 34 Standard Full Screen Crop Anamorphic Flexview Page 34 JVC HR-1080-PRO Video Processor User Manual Description 16:9 input signals shown full screen on 16:9 output display Grayed out. No action. Grayed out. No action. Grayed out. No action. Grayed out. No action.
-
Page 35: Appendix A
JVC HR-1080-PRO Video Processor User Manual 6 Appendix A Table 9: Input Modes Supported Input Timing Format Item Mode Resolution Description 480i (NTSC) 720 x 485 60 Hz 576i (PAL) 720 x 576 50 HZ 576i 720 x 576 (SECAM) - Page 36 1152 x 870 75 Hz 1440 x 960 96 Hz MAC 20 1680 x 1050 88 Hz MAC 23 1920 x 1200 76 Hz Page 36 JVC HR-1080-PRO Video Processor User Manual Frequency HDMI Input Video Source Composite S-video Component JVC Inc.