Choosing Your Connections; Network Connection - TCL C825 Series Operation Manual

Choosing Your Connections

There are several ways to connect signal sources, such as BD player, DVD players and set-top boxes, to your TV.
Note: No cables are supplied with this TV. Please purchase the necessary cables for connection. A high-speed HDMI
cable is recommended for better compatibility.
Input
Antenna/Cable
Composite Video
HDMI

Network Connection

Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service
provider (ISP).
Your TV can be connected to your home network in two ways:
• Wired, using the RJ45 (LAN) connector on the back panel.
• Wireless, using the internal wireless and your home wireless network.
Note: Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection
method may be different depending on your actual network configuration. If you have any questions about your home
network, please refer to your ISP.
Connecting to a wired network
To connect to a wired network:
1. Ensure you have:
• An Ethernet cable long enough to reach your TV
• A router or modem with an available Ethernet
port
• A high-speed Internet connection
• An Ethernet (LAN) port on the back of the TV
2. Connect your Ethernet cable to the router and to
the Ethernet port on the back of the TV.
3. Use the Network & Internet menu to configure the
TV.
Connecting to a wireless network
To connect to a wireless network:
1. Ensure you have:
• A router broadcasting a high-speed wireless
signal
• A high-speed Internet connection
2. Use the Network & Internet menu to configure the
TV.
Signal Compatibility
480i, 480p, 720p, 1080i
480i
480i, 480p, 720p, 1080i, 1080p, 2160p
LAN port
10
Getting Started
Router
Modem
Modem
Wireless router
Internet
Internet