Chapter 2 Connections And Setup; Tv Buttons; Initial Setup - TCL 32S5400AF Operation Manual

Chapter 2

TV Buttons

- Power button
If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one
controller.
You can turn on the TV by pressing the
While the TV is on, press the
the multi-function menu, please refer to the figure below.
CH+
Standby
Tips: Short click to change, long click to select.
• Press to move the highlight to the next function selection
•
Note:
You can follow the on-screen guide to operate. Figures and illustrations are provided for reference only and may
vary depending on the model.

Initial Setup

your remote, connecting to the network, and more. During each step, either make a choice or skip the step. If you
skip a step, you can perform the setup later from the settings menu.
Note: When you pair your remote, keep the remote control and TV in 1 meter, and follow the on-screen guide for
pairing.
will be promted to pair the remote with the TV again when you use the Google
button. It may work just as Standby/Quit standby button, or as a multi-function
button at the bottom left of the TV back case.
button to display the multi-function menu. For more information about how to use
CH- Volume+ Volume-
Welcome wizard
Connections and Setup
Source OK
appears, which guides you through the initial setup
4