Table of Contents
Advertisement
2. Use the numeric buttons on the remote control to
enter the password 1234 or your own password in
case you have changed it.
3. Select OK and press OK to confirm.
4. The Welcome screen appears. Follow the
instructions in the section Initial setup.
Using the hands-free TV voice control
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access
the Google website first. Then follow the steps below
to access.
1. Turn the built-in MIC switch (Please refer to the
Quick Start Guide to find the MIC switch on your
TV set) to on before using this function.
2. Access the Android TV homepage by pressing
on the remote control.
3. Select
> General Settings > Device
Preferences > Google Assistant > On and press
OK to turn it on.
4. Say "OK Google" to activate it.
Notes:
- This hands-free TV voice control is only available
for selected models. For details, please refer to
your local dealer.
- A quiet surrounding is required for better function
when using it. The recommended distance for
using the hands-free TV voice control is within 2
meters in front of it.
- Turn the built-in MIC switch to off if you are not
going to use it.
- It is recommended to set the
Settings > Device Preferences > Google
Assistant > On to off to avoid interference when
there is more than one terminal using the Google
assistant function at the same time.
- The availability of hands-free TV voice control
depends on your region/country/language.
- Standby power consumption will increase
because the built-in MIC is always listening when
the Google Assistant or voice control with the
built-in MIC is enabled.
> General
EN 15
Using more of your TV
Advertisement
Table of Contents
