Chapter 4: Using More Of Your Tv; Installing Channels; Using Subtitle; Turning On/Off Subtitle - TCL C825 Series Operation Manual

Chapter 4

Installing Channels

This section describes how to search and store
channels automatically. This may be done in either of
the cases below:
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1. In TV mode, press
(Settings) > Channels & Inputs > Channels >
Channel Scan and press OK/Right to enter.
2. The TV installs and arranges channels according
to your country or region. Press Up/Down to select
Country/Region, and press OK/Right to enter.
Enter the default password 1234 or your own
password in case you have changed the password
(Settings) > System > Parental Controls
in the
menu. Press Up/Down to select your country or
region and press OK to confirm.
3. Press Up/Down to select Scan Automatically and
press OK to enter.
4. Press Up/Down to select Tuner mode and press
Left/Right to select Cable or Antenna.
5. Press Up/Down to select other options and use
Left/Right to configure.
6. After configuration is completed, press Down to
select Search and press OK to start scanning
channels.
7. The channel search may take a few minutes. After
the automatic search, channels are arranged in
a preset order. If you wish to hide, edit or delete
channels, press on the remote control, select
(Settings) > Channels & Inputs > Channels >
Channel Organizer and press OK to enter.
Note: If the channel search retrieved only the analog
channels it could be caused by poor broadcasting
and therefore is not covered by manufacturer
warranty. Manufacturers cannot be held
responsible for lack of or poor broadcasting in
some areas.

Using Subtitle

You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T/DVB-T2 digital
broadcasts. With digital broadcasts, you have the
additional option of selecting a preferred subtitle
language.
Note: Some options are available only when Subtitle is
set to on.

Turning On/Off Subtitle

1. Press on the remote control, select
> Channels & Inputs > Channels > Subtitle and
press OK/Right to enter.
on the remote control, select
(Settings)
Using More of Your TV
2. Select the Subtitle option, and press OK to toggle
between on or off.
3. Press to return to the previous menu.
Enabling Subtitle Languages on Digital TV
Channels
1. Press
on the remote control, select
> Channels & Inputs > Channels > Subtitle >
Digital Subtitle Language 1st and press OK/Right
to enter.
2. Press Up/Down to select a subtitle language as your
preferred language and press OK to confirm.
3. Press Up/Down to select Digital Subtitle Language
2nd and press OK/Right to enter.
4. Press Up/Down to select a secondary subtitle
language and press OK to confirm.
5. Press
to return to the previous menu.
Selecting a Subtitle Type on Digital TV
Channels
1. Press on the remote control, select
> Channels & Inputs > Channels > Subtitle >
Subtitle Type and press OK/Right to enter.
2. Press Up/Down to select a subtitle type and press
OK to confirm. You can select Hearing Impaired
to display the hearing impaired subtitles with your
selected language.
3. Press to return to the previous menu.

Using Teletext

Selecting Decoding Page Language

1. Press on the remote control, select
> Channels & Inputs > Channels > Teletext >
Decoding Page Language and press OK/Right to
enter.
2. Press Up/Down to select a proper type of language
in which Teletext will display and press OK to
confirm.
3. Press to return to the previous menu.

Digital Teletext Language

On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1. Press on the remote control, select
> Channels & Inputs > Channels > Teletext >
Digital Teletext Language and press OK/Right to
enter.
13
(Settings)
(Settings)
(Settings)
(Settings)