Cast - Elo TouchSystems I 4 Slate Series User Manual

•
Verify the pairing number is the same.
•
If the pairing requests a PIN, enter the PIN.
•
Tap PAIR, to connect.
•
When the Bluetooth device is successfully connected to I-Series 4, the connection will show as Active or Connected.
Unpair a paired Bluetooth Device
•
Navigate back to 'Connected devices' screen, from AVAILABLE MEDIA DEVICES or PREVIOUSLY CONNECTED DEVICES.
•
Tap settings of the connected device (e.g. JBL Flip 3).
•
In the settings menu, it is possible to DISCONNECT, FORGET (to unpair the device) and to enable and disable Phone calls, Media
audio and Contact sharing.

Cast

This allows to mirror the I-Series display onto a wireless display device (e.g. Smart TV).
Note: Make sure the wireless display capable device and I-Series 4 are on the same wireless network. See Network & Internet connection on
this user manual.
•
Tap Connection preferences.
User Manual –I-Series 4 Slate Value
BT Device Setting
UM600644 Rev A page 32 of 81