Connected devices
The Connected devices application allows you to pair Bluetooth devices, NFC, and USB (Tethering File transfer MDI and PTP)
To setup, enter
Settings → Connected devices →
USB
Note:
To activate the USB settings, connect the USB cable from the I-Series 4 to another device or PC. Once the I-Series detects the external
computer, it will become available in the USB preference settings.
•
Tap USB.
•
From USB Preferences under USE USB FOR choose and tap a feature to enable.
Bluetooth
Note:
Make sure the BT device is on and is discoverable.
•
Tap Connection preferences.
•
Tap Bluetooth.
•
Tap toggle switch to ON
•
Tap + Pair new device.
•
From Available devices screen, tap a device to pair.
•
When a pairing request message appears.
User Manual –I-Series 4 Slate Value
File transfer – This will share I-Series 4 internal and SD shared storage.
USB tethering – This will share internet network connection.
MIDI - Musical Instrument Digital Interface.
PTP - Picture Transfer Protocol.
No data transfer – (Default Setting) No data will be transferred even if the USB cable is
connected.
.
UM600644 Rev A page 31 of 81