Starting Mesh Intercom; Mic Enable/Disable (Default: Enable); Channel Setting (Default: 1) - Sena M1 EVO User Manual

6 MESH INTERCOM

6.2 Starting Mesh Intercom

When Mesh Intercom is enabled, the M1 EVO will automatically
connect to nearby M1 EVO users and allow them to talk to each other
by pressing the Center Button.
Mesh Intercom On
=
"Mesh intercom on"

6.3 Mic Enable/Disable (Default: Enable)

Users can enable/disable the microphone when communicating in a
Mesh Intercom.
Enable/Disable the Microphone
=

6.4 Channel Setting (Default: 1)

If the Mesh Intercom communication experiences interference because
other groups are also using channel 1, change the channel. You can
select one of 1 to 9 channels.
1. Enter into the Channel Setting.
=
"Channel setting, 1"
TAP
1x
HOLD
1s
TAP
2x
Mesh Intercom Off
=
"Mesh intercom off"
M1 EVO Smart Mountain Bike Helmet | 20
TAP
1x