Controller Instructions - Snailax SL-232A Use & Care Manual

Controller Instruc�ons
NECK massage height adjustment
1. /
Long Press these bu�ons to manually adjust
Neck Massage height.
NECK massage Direc�on
2. /
Manual programme: Press once to turn on neck
massage, press again to shi� rota�on direc�on,
press once again to turn off.
Auto programme: press to turn on neck shiatsu
and automa�cally shi� rota�on direc�on per 1min,
press again to turn off.
3. AUTO: press to ac�vate all func�ons, press again to
turn off.
Upper/Lower: Select Upper or Lower back to designate
the area covered by the shiatsu massage.
4. Shiatsu Bu�on
To turn on/off a full back shiatsu massage.
Note: Does not work with Adjust Bu�on.
5. Adjust Bu�on
To adjust the width of the massage nodes
during the rolling massage.
6. Rolling Bu�on
Press to ac�vate Rolling func�on, the massage nodes travel up & down across the
muscle gently.
7. Heat Therapy:
Press to ac�vate heat func�on on neck and back Simultaneously.
The heat can be turned on independently.
8. Target Bu�on
Press to focus traveling massage nodes at desired posi�on.
9. Air Compression Bu�on
Press to turn on/off the seat and lumbar compression massage func�on on thighs,
seat and waist. Three compression intensity are selectable.
10. SEAT Bu�on
To turn on/off seat vibra�on Massage, Low, Medium, High three intensity for op�on.
11. Power Bu�on
Press to ac�vate standby mode, it must be on for any func�on to work,
press again to turn off.
Note: Switching off the power while in opera�on will cause the rollers to return to
their storage posi�on.
5
SHIATSU
AUTO
UPPER ROLLING
TARGET
LOWER