Controller Instructions - Snailax SL-581 Use & Care Manual

Controller Instructions

• Please choose a chair with desired height and be seated,
then put your feet into the product ( see right picture).
Operate below control panel to get foot massages.
Power Mode
Power Button
Press to turn on the massager, the indicator light turns red.
The massager automatically activate the default settings i.e.
the massager works on Mode 1 and on Low intensity.
Press again to turn off the massager.
Mode button
Press to change the Mode between Mode 1 to Mode 3.
Mode 1 --Indicator light turns red
Mode 2 --Indicator light turns blue
Mode 3 --Indicator light turns blue & red
Heat Button
Press to activate the Heat function, the indicator light turns red.
Press again to turn off the Heat
Intensity Button for Air pressure
Press to choose Low, Medium or High intensity of air pressure.
Low intensity -- Indicator light turns blue
Medium intensity -- Indicator light turns red
High intensity --Indicator light turns blue & red
After use
Turn of f the power button on the control panel.
•
• Remove the plug from the power supply socket.
Caution
Please don't put water or other liquid on the control panel.
Please don't press the button too long time at a time to avoid the program confused.
When power failure happens during massage, please turn off the power and
pull out of the plug from socket.
Please do not let your hand or fingers close to and inserted into the gap of products
for preventing any injuries caused.
Please do not let children and pets play the products for preventing any
accident happened.
Heat Intensity
5