Table of Contents
Advertisement
Quick Links
2
Profile
009941-F 01/2010
Scott Health & Safety Oy
P.O.BOX 501
FI-65101 Vaasa, Finland
TECHNICAL SUPPORT & SALES
Tel. +358 (0)6 3244 543 or 544 or 535
F ax +358 (0)6 3244 591
www.scotthealthsafety.com
032070 Profile2 L
032071 Profile2 M
032072 Profile2 S
032270 Profile2 L H
032271 Profile2 M H
032272 Profile2 S H
Advertisement
Table of Contents
Related Manuals for Scott Profile2
Summary of Contents for Scott Profile2
- Page 1 Profile 009941-F 01/2010 Scott Health & Safety Oy P.O.BOX 501 FI-65101 Vaasa, Finland TECHNICAL SUPPORT & SALES Tel. +358 (0)6 3244 543 or 544 or 535 F ax +358 (0)6 3244 591 www.scotthealthsafety.com 032070 Profile2 L 032071 Profile2 M 032072 Profile2 S...
- Page 2 Profile...
- Page 3 A1B1E1-P3 R 044082 A1B1E1K1 044073 A1B1E1K1-P3 R 044083 *) In Australia only, the following limitations apply: Provides P3 protection only with a full face respirator (Promask2) (AS NZS 1716:2003 refers). Provides P2 protection with a half face negative pressure respirator (Profile2).
- Page 5 Year of manufacture inside 2004, December +50 ºC -10 ºC < 75 % Symbols See Instructions for Use! Recommended storage conditions (temperature and humidity) Twin-filter-use (2 filters / same type + class). BGIA, DE-53754 Sankt Augustin, Australia (032070, 032071, 032072) Russia Germany...
- Page 6 Instructions for Use 032093 Head harness H (+ slide-stop + buckle + cover) 032092 Head harness (+ cradle + buckle + cover) Facepiece Cover Inhalation valve discs Exhalation valve disc 032090 Valve set Filter Splash guard ◄ Aligning mark ( 032095 Hood Profile Litehood...
- Page 7 Half mask with gas filter *) Filter types A, B, E, K, AX, SX, Hg-P3 and NO- P3 have different applications. For more information, see Instructions for Use of Scott Health & Safety filters. Device with combined filter The specified multiples of threshold value for the gas or particle filters...
- Page 8 Do not use solvents (e.g. alcohol, acetone, turpentine), hot water or bleaching agents (perborate, percarbonate). Disinfection After cleaning, disinfect the the inside/face seal with a disinfection solution (e.g. Scott Trigene), rinse and let it dry (max +50 ºC). Finally, reassemble the mask. Storage Storage protected from direct sunlight, at -10...+50 °C and relative humidity (RH) under 75...
Need help?
Do you have a question about the Profile2 and is the answer not in the manual?
Questions and answers