Installing The Ribbon Cassette - Simplex 500 Operation Manual

All manuals and user guides at all-guides.com

Installing the Ribbon Cassette

Panel open button
(at both sides of the unit)
Panel cover
Ribbon cassette
Print head
1
down the panel, open buttons at both
sides of the unit, and lift the panel
cover away from you.
2
arrow-indicated direction to make the
ribbon taut.
To insert the ribbon cassette inside
Key hole
the unit, lift the panel house away from
you first.
between the ribbon mask and the print
Panel house
head. Slide the latch on the lower side
of the cassette into projections on the
unit. Then let the cassette snap into
place.
When having difficulty inserting the
ribbon, insert it while turning the knob.
Make sure that the ribbon is placed
between the print head and the ribbon
mask as illustrated in the figure at left.
Print head
3
the back of the unit. Lower it toward
this side to close and lock the unit.
Ribbon mask
Ribbon
Unlock the unit. While holding
Turn the knob on the cassette in the
Then thread the ribbon
Put the panel cover on the hook at
Panel cover
5