Simplex 500 Operation Manual page 24

12Hr.
1/60
1/100
YEAR MONTH
RED/BLK. EX.ALM
PAY ENDING DATE/TIME DAY ADV.TIME
SELECT
12Hr.
1/60
1/100
Staying lit up
YEAR MONTH
RED/BLK. EX.ALM
PAY ENDING DATE/TIME DAY ADV.TIME
SELECT
P-02
Flashing
12Hr.
1/60
1/100
YEAR MONTH
RED/BLK. EX.ALM
PAY ENDING DATE/TIME DAY ADV.TIME
SELECT
Staying lit up
12Hr.
1/60
1/100
YEAR MONTH
RED/BLK. EX.ALM
PAY ENDING DATE/TIME DAY ADV.TIME
SELECT
22
All manuals and user guides at all-guides.com
Erase "-"
under MO - SA.
SU MO TU WE TH FR SA
DAY HOUR MINUTE SECOND/CARD
COL.
D.S.T PROGRAM EXT.ALARM
SET
SU MO TU WE TH FR SA
DAY HOUR MINUTE SECOND/CARD
COL.
D.S.T PROGRAM EXT.ALARM
SET
SU MO TU WE TH FR SA
DAY HOUR MINUTE SECOND/CARD
COL.
D.S.T PROGRAM EXT.ALARM
SET
SU MO TU WE TH FR SA
DAY HOUR MINUTE SECOND/CARD
COL.
D.S.T PROGRAM EXT.ALARM
SET
Take the same steps described above
to erase the bars for the remaining days
of the week.
After erasing the bar under "SA", press
SET .
The P-01 indication stays lit up
completing the P-01 program setting.
Make sure the bar under any day of
the week stays lit up. If the bar
does not stay lit up, the time table
program will not operate properly.
3
To set P-02
After the setting of P-01 is completed,
press . The program NO., the
indication at the upper left "P-01",
flashes. Then press
02" setting mode.
The program NO. indication "P-02"
flashes.
Make settings for P-02 in the same
manner as for P-01, as illustrated in the
figures at the left.
Press SET .
The P-02 indication now stays lit up,
showing completion of the P-02
program setting.
Likewise, to shift to P-03, press
cause the P-03 indication to appear
flashing.
to enter "P-
to