Table of Contents
Advertisement
NLSet up and connect
Remove the transport
2.
reinforcements.
Loosen and remove the screws of
3.
the horizontal transport
reinforcement with a T20
screwdriver.
Remove the transport
4.
reinforcement.
16
4.6 Connecting device
Connect water supply hose
Connect the water supply hose to the
1.
appliance.
Connect the water inlet hose to the
2.
tap (26.4 mm = 3/4").
Open the tap carefully and check
3.
that the connections are tight.
Connection types for water drainage
The information will help you to connect
this appliance to the water outlet.
PAY ATTENTION!
When draining, the water drain hose is
under pressure and can come loose
from the installed connection position.
▶
Secure the water drain hose against
unintentional disconnection.
Advertisement
Table of Contents
