Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bosch WGG256ZXES
Summary of Contents for Bosch WGG256ZXES
- Page 1 Washing machine WGG256ZXES [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 23 1.1 General information.... 4 9 Programmes ...... 25 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 29 1.4 Safe installation ...... 5 11 Laundry........ 29 1.5 Safe use ........ - Page 3 15 Basic settings...... 33 15.1 Overview of the basic set- tings........ 33 15.2 Changing the basic set- tings........ 34 16 Cleaning and servicing ... 34 16.1 Cleaning the drum.... 34 16.2 Cleaning the detergent drawer........ 34 16.3 Cleaning the drain pump.. 35 17 Troubleshooting...... 38 17.1 Emergency release ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with flammable cleaning agents that contain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. ▶ Never make any technical modifications to the appliance or its features. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶... -
Page 10: Preventing Material Damage
en Preventing material damage If the water pressure is too high or Preventing material damage 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least Preventing material damage ATTENTION! 100 kPa (1 bar) and max. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Set the maximum spin speed if you Environmental protection and saving energy 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter Environmental protection and saving energy the programme duration when dry- 3.1 Disposing of packaging... -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ Installation and connection 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Installation and connection Note: The appliance has undergone 4.1 Unpacking the appliance a function test at the factory. This may cause water stains in the appli- ATTENTION! ance, which the first wash cycle re-... - Page 13 Installation and connection en If the appliance is tilted at an angle 4.4 Removing the transit greater than 40°, residual water may bolts leak out of the appliance and cause material damage. The appliance is secured for trans- Tilt the appliance carefully. portation using transit bolts on the ▶...
-
Page 14: Connecting The Appliance
en Installation and connection Remove the power cable from the Push the 4 cover caps downwards. holder. Note: To install the transit bolts to Remove the 4 sleeves. transport the appliance, perform these steps again in the reverse or- der. 4.5 Connecting the appliance Connecting the water inlet hose Connect the water inlet hose. -
Page 15: Aligning The Appliance
Installation and connection en Open the water tap carefully and Connecting the appliance to the check that the connection points electricity supply are tight. Note: Your electrical domestic install- ation for this appliance must comply Water outlet connection types with the local legal provisions and This information is intended to help safety regulations, and should in- you to connect this appliance to the... -
Page 16: Before Using For The First Time
en Before using for the first time To align the appliance, turn the ap- Before using for the first time 5 Before using for the pliance feet. Check that the appli- ance is level using a spirit level. first time Prepare the appliance for use. Before using for the first time 5.1 Starting an empty wash- ing cycle... - Page 17 Before using for the first time en Add washing powder containing oxygen bleach to compartment II. To prevent foaming, use only half of the amount of detergent recom- mended by the detergent manufac- turer for light soiling. Do not use detergent suitable for woollens or delicates.
-
Page 18: Appliance
en Familiarising yourself with your appliance Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 19: Control Panel
Familiarising yourself with your appliance en Measuring aid for liquid deter- gent → "Inserting the measuring aid", Page 30 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. -
Page 20: Display
en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. 10 / Ter- Program end time minado en / em) → "Buttons", Page 23 10.0 Recommendation for the maximum load capacity for the... - Page 21 Display en Display Description Programme status: Rinsing Programme status: Spinning Programme status: Pause Programme status: Programme end Programme status: Steaming ¡ Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ance has been operated. → "Deactivating the childproof lock", Page 33 Fácil) The crease-reduction function is activated.
- Page 22 en Display Display Description E:35 / -10 Error code, error display, signal. → "Troubleshooting", Page 38 Example...
-
Page 23: Buttons
Buttons en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information Inicio/Pausa + ¡ Start Start, cancel or pause the pro- Carga gramme. ¡ Cancel ¡ Pause SpeedPerfect ¡ Activate Activate or deactivate a shorter pro- gramme duration. - Page 24 en Buttons Button Selection More information Extra ¡ Activate Activate or deactivate a washing pro- gramme with more water and an addi- ¡ Deactivate tional rinse cycle. Recommended for particularly sensit- ive skin or in regions with very soft water.
-
Page 25: Programmes
Programmes en Programmes 9 Programmes Programmes Notes ¡ The laundry's care labels provide you with additional information on pro- gramme selection. ¡ For programmes with a temperature setting of 80 °C or 90 °C, the actual temperature may deviate from the specified temperature. The washing effect and hygiene expected at the specified temperatures is nevertheless achieved. - Page 26 en Programmes Programme Description Max. load (kg) ¡ Max. 1200 rpm Mix Wash items made from cotton, linen, or synthetic or blended fabrics. Suitable for lightly soiled laundry. Programme setting: ¡ Max. 60 °C ¡ Max. 1600 rpm Delicado/ Wash delicate, washable items made from silk, vis- Seda cose and synthetic fabrics.
- Page 27 Programmes en Programme Description Max. load (kg) ¡ Max. 1600 rpm Sport Wash sports and leisure items made from synthetic fibres, microfibre or fleece. Use a detergent that is suitable for sports items. Do not use fabric softener. Tip: Use the ...
-
Page 28: Laundry
en Programmes Programme Description Max. load (kg) ¡ If you regularly wash at temperatures of 40 °C or lower ¡ After a prolonged period of non-use Use washing powder containing oxygen bleach. Add the washing powder containing oxygen bleach to compartment II for the main wash. → "Detergent drawer", Page 18 Halve the amount of detergent to avoid foaming. -
Page 29: Preparing The Laundry
Accessories en Accessories 10 Accessories Use original accessories. These have been made especially for your appliance. Accessories Order num- Water inlet hose ex- Extend the water inlet hose for cold water WMZ2381 tension or AquaStop (approx. 2.50 m). Fixing brackets Improves the stability of the appliance. WMZ2200 Longer water inlet Replace the standard water inlet hose with... -
Page 30: Basic Operation
en Basic operation ¡ Do not mix detergent and fabric Note: The programme settings are softener not saved permanently for the pro- ¡ Do not use products that have ex- gramme. pired or are highly congealed 13.4 Loading laundry ¡ Do not use products containing solvents, caustic agents or volatile Note: To prevent creasing, note the substances... -
Page 31: Using The Measuring Aid
Basic operation en Insert the measuring aid. Fold the measuring aid down and click it into place. 13.6 Using the measuring aid 13.7 Adding detergent and To more easily measure the liquid care product detergent, you can use a measuring aid in the detergent drawer. Note: Observe the information about detergents and care products Note: Do not use a measuring aid for... -
Page 32: Soaking Laundry
en Basic operation – If the temperature is high, start 13.9 Soaking laundry programme. Note: No additional detergent is re- – If the water level is high, start quired for soaking. The appliance programme or select a uses the filled detergent for soaking suitable programme for draining. -
Page 33: Childproof Lock
Childproof lock en Wipe the rubber gasket dry and re- So that the programme currently move any foreign objects. running is not cancelled, the pro- gramme selector must be set to the initial programme. goes out on the display. Basic settings 15 Basic settings You can configure the basic settings Basic settings... -
Page 34: Changing The Basic Set- Tings
en Cleaning and servicing for caring for the inside of the ap- 15.2 Changing the basic set- pliance. tings → "Accessories", Page 29 Set the programme selector to po- 16.2 Cleaning the detergent sition 1. → Page 33 Press Centrif. and, at the same drawer time, turn the programme selector Pull out the detergent drawer. -
Page 35: Cleaning The Drain Pump
Cleaning and servicing en Clean the detergent drawer and in- 16.3 Cleaning the drain pump sert with water and a brush, and Clean the drain pump regularly, at then dry them. least once a year, as well as in the event of faults, e.g. blockages or rat- tling noises. - Page 36 en Cleaning and servicing Take the drain hose out of the Insert the drain hose into the holder. holder. CAUTION - Risk of scalding! Cleaning the drain pump When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty.
- Page 37 Cleaning and servicing en Clean the interior, the thread on Screw the pump cap as far as it the pump cap and the pump hous- will go. ing. The handle on the pump cap must be in a vertical position. Ensure that the impeller in the drain pump can rotate.
-
Page 38: Troubleshooting
en Troubleshooting Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶... - Page 39 Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 40 en Troubleshooting Fault Cause and troubleshooting lights up. The temperature is too high. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the programme", Page 32 Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 25 flashes.
- Page 41 Troubleshooting en Fault Cause and troubleshooting The programme does Inicio/Pausa + Carga has not been pressed. not start. Press Inicio/Pausa + Carga. ▶ Door is not closed. Close the door. ▶ Childproof lock is activated. Deactivate childproof lock. ▶...
- Page 42 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Continue the programme by selecting or a suit- ▶ ing. able programme for draining and pressing Ini- cio/Pausa + Carga. → "Resuming the programme when the programme status is Rinse Hold", Page 32 The water outlet hose is connected too high.
- Page 43 Troubleshooting en Fault Cause and troubleshooting The spin cycle runs The unbalanced load detection system eliminates an several times. imbalance by repeatedly redistributing the laundry. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
- Page 44 en Troubleshooting Fault Cause and troubleshooting Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting Loud noises during Secure the appliance feet. ▶ the spin cycle. → "Aligning the appliance", Page 15 Transit bolts have not been removed. → "Removing the transit bolts", Page 13. ▶ Banging noises, rat- Foreign bodies have got into the drain pump. tling in the drain → "Cleaning the drain pump", Page 35.
- Page 46 en Troubleshooting Fault Cause and troubleshooting The spin result is not Note: Where possible, mix large and small items in satisfactory. The laun- the drum. Different sized items of laundry distribute dry is too wet/too themselves better during the spin cycle. damp. Start the programme.
- Page 47 Troubleshooting en Fault Cause and troubleshooting Fabric softener re- The use of fabric softener is not supported for the se- mains in the detergent lected programme. drawer. Before washing, check whether the use of fabric ▶ softener is supported for the selected programme. → "Programmes", Page 25 Water is leaking from Dirt on the door or seal causes leaks.
-
Page 48: Emergency Release
en Transportation, storage and disposal 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 35 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 49: Disposing Of Old Appliance
Customer Service en 18.4 Disposing of old appli- Customer Service 19 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! - Page 50 en Consumption values Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
-
Page 51: Technical Data
Technical data en Technical data 21 Technical data Technical data Appliance height 84.5 cm Appliance width 59.8 cm Appliance depth 59.0 cm Appliance depth 63.6 cm with door closed Appliance depth 107.3 cm with door open Weight 78.5 kg Maximum load 10.0 kg Mains voltage 220-240 V, 50-60 Hz Minimum in- 10 A stallation protec- tion... - Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.