How To Open The Front Panel - Hitachi RAS-P25YHAB Manual

MAINTENANCE - Removing and attaching Front Panel
Slide
Arm shaft
Arm shaft
Insert
Step
* If the front panel is loose, it may come off and drop.
* When opening the front panel upwards, please do not use excessive force. If the front panel
comes off the device, this may cause it to malfunction.
* When the front panel remains open, be sure to push up the panel support.
Push
Arm shaft
Arm shaft How to attach the Front Panel
Insert
Step
- 44 -

How to open the Front Panel

Open the Front Panel.
1
Remove the Front Panel.
2
1) Push the end of the right-side arm
outward to release the shaft.
2) Move the left-side arm outwards to
release the left arm, and then pull
the panel toward you.
Take the Indoor unit front panel.
1
1) Insert the shaft of the left arm along
the unit into the hole.
2) Securely insert the shaft of the right
arm along the step on the unit into
the hole.
Make sure that the front panel is
2
securely attached, and then close the
front panel.