Table of Contents
Advertisement
VARIOUS FUNCTIONS
Auto Restart Control
If there is a power failure, operation will be automatically restarted when the power is resumed with previous operation
mode and airflow direction.
(As the operation is not stopped by remote controller.)
If you intend not to continue the operation when the power is resumed, switch off the power supply.
When you switch on the circuit breaker, the operation will be automatically restarted with previous operation mode
and airflow direction.
Note: 1. If you do not require Auto Restart Control, please consult your sales agent.
2. Auto Restart Control is not available when Timer or Sleep Timer mode is set.
AUTOMATIC OPERATION
The device will automatically determine the mode of operation, H
room temperature. The selected mode of operation will change when the room temperature varies.
Sleep
F.Wash
Wind Mode
Press the Mode selector button so that the display indicates the
(Auto) mode of operation.
When Auto has been selected, the device will automatically
1
determine the mode of operation, Heat or Cool depending on
the current room temperature.
If the mode automatically selected by the unit is not satisfactory,
manually change the mode setting (Heat, Dehumidify, Cool
or Fan).
Set the desired Fan Speed with the
display indicates the setting).
2
(Auto)
Set the desired room temperature with the Temperature buttons
3
(the display indicates the setting).
The temperature setting and the actual room temperature may vary
depending on conditions.
Press the
(Start/Stop) button.
START
Operation starts with a beep.
STOP
Press the button again to stop operation.
As the settings are stored in the memory of the remote controller, you
only have to press the
NOTE：
After the unit starts the automatic operation(including the operation by
temporary switch), the cooling and heating lamps light up for a few seconds
at the same time to determine the mode of operation, and then the one of
heating or cooling lamp lights off. It's not a machine failure.
- 10 -
eat
or C
ool
depending on the current
(Fan Speed) button (the
(High)
(Silent)
(L
ow
)
(S
tart top
/S
) button next time.
(Med)
Advertisement
Table of Contents
