Table of Contents
Advertisement
RD-7505(A)_ENG_101115_RD-7505(A)_ENG 2010-11-16 오전 10:36 페이지 34
OTHER FUNCTIONS
Operating the sleep timer
• The sleep timer allows the system to continue to operate for a specified period of time before automatically shutting off.
• To set the receiver to automatically turn off after the specified period of time.
Adjusting the brightness of the fluorescent display
Displaying the operation status
During playback,
Playing ROOM 2 source
• The ROOM 2 function alllows enjoying one source in the
main room and playing another in a different room at the
same time.
All manuals and user guides at all-guides.com
34
• Each time this button is pressed, the sleep time changes
as follows:
→ 10 → 20 → 30 → --- → 90 → OFF
Unit : minutes
• While operating the sleep timer, "
• When the sleep time is selected, the fluorescent display
is dimly lit.
• Each time this button is pressed, the brightness of
the fluorescent display changes as follows:
→ ON → dimmer → OFF
• In the display OFF mode, pressing some buttons
cancel the display OFF mode to display the operation
status.
• Each time this button is pressed, the display mode
changes as follows:
Surround
→
→
→
Volume
mode
• When the SIRIUS Satellite Radio function is available in
your country, for details on the SIRIUS information, see
"Displaying SIRIUS information" on page 30.
• Each time this button is pressed, the ROOM 2 MODE
changes as follows:
ON : To turn on the ROOM 2 function.("R2" lights up.)
↕
OFF : To turn it off. ("R2" goes off.)
• You can select the desired ROOM 2 source on the MULTI
ROOM menu only. (For details on ROOM 2 playback,
refer to "SETTING THE MULTI ROOM" on page 50.)
■Notes :
• Even when this receiver enters the standby mode, in such
a case that "R2" lights up still, meaning only the ROOM 2
circuitry operates, the ROOM 2 source can be played
independently.
• When you do not use the ROOM 2 function, turn off the
ROOM 2 function to save electricity.
" lights up.
Signal
Input
→
input
source
Advertisement
Table of Contents
