Viewing The Remote Temperature Sensors - Carrier 33CS450-01 Owner's Manual

Viewing the Remote Temperature Sensors

Viewing the Remote Temperature Sensors
Each sensor is programmed with a "hard-coded" address that the
thermostat "scans" in order from lowest to highest. Therefore, in
order to determine which sensor corresponds to the number on the
setup screen you will need to disconnect each sensor from the group
in order to determine which sensor number reads dashes.
MODE Press the MODE button. While holding the MODE,
press the PROGRAM button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until setup step #48 appears.
Remote 72
Setup
Sensor #1.
68
Setup
Remote
Sensor #2
76
Setup
Remote
Sensor #3
80
Setup
Remote
Sensor #4
Remote 65
Setup
Sensor #5
22
Note: Press the
button momentarily
to move through the
setup screens. Press
48
and hold the
button to move back-
wards through the
setup screens.
Remote
i
72
Remote
Sensor #6
48
Remote
2
70
Remote
Sensor #7
48
Remote
3
73
Remote
Sensor #8
48
Remote
4
PROGRAM
Press the MODE button to
return to normal operation.
48
Remote
5
Page 22.4
Carrier
MODE
MODE
48
Setup
Remote
6
48
Setup
Remote
7
48
Setup
Remote
8