Toshiba Vm Series Instruction Manual page 83

7.2.5 Configuration of in-ring map
The in-ring map indicates the state of the stations that belong to the TC-net
100. The in-ring map shows the stations that are currently on the network.
If an error occurs in the TC-net 100 network or in the TNB itself, the in-ring map
is cleared to zero. The information in the in-ring map is updated in cycles of
10ms.
Figure 7-10 shows the configuration of the in-ring map.
1F
STN STN STN STN
255 254 253 252
STN STN STN STN
223 222 221 220
STN STN STN STN
63 62 61 60
STN STN STN STN
31 30 29 28
(Note) STN25 shows Station No. 25.
STN STN STN
251 250 249
STN STN STN
219 218 217
・
・
・
STN STN STN
59 58 57
STN STN STN
27 26 25
Figure 7-10 Configuration of in-ring map
Unified Controller Vm series TC-net 100(TNB) Module Manual
STN STN STN STN
230 229 228 227
STN STN STN STN
198 197 196 195
STN STN STN STN
38 37 36 35
STN STN STN STN
6 5 4 3
0
STN STN STN
226 225 224
STN STN STN
194 193 192
STN STN STN
34 33 32
STN STN STN
2 1 0
69