Agilent Technologies 8960 Series Reference Manual page 725

Manual User Error Messages
Description
These messages are intended to be displayed on the manual user interface only, and are not entered into the
Error/Event Queue.
Error Message
The function you requested is not yet available.
IQ Calibration completed successfully for modulator <N>
IQ Calibration failed for modulator <N>
The function you requested is not available in this TA.
IQ Calibration for modulator 1 in progress (10 minutes). Call
processing disabled.
IQ Calibration for modulator 2 in progress (6 minutes). Call
processing disabled.
Instrument warning: Audio generator instrument has been
closed.
Measurement warning: Audio Analyzer instrument has been
closed.
Measurement warning: Analog audio measurement has been
closed.
Protocol warning: Setting change has terminated the link
with the DUT
Warning; Call processing disabled
IQ first modulator calibration X%
IQ second modulator calibration X%
Description
The test set does not have this capability.
<N> is the IQ modulator number that you are
attempting to calibrate, <N> is 1 or 2.
<N> is the IQ modulator number that you are
attempting to calibrate, <N> is 1 or 2.
This function is used in another Test Application.
This error is cleared by either the; IQ Calibration
completed successfully for modulator <N>, or IQ
Calibration failed for modulator <N>.
This error is cleared by either the; IQ Calibration
completed successfully for modulator <N>, or IQ
Calibration failed for modulator <N>.
The audio generator instrument was closed
automatically by the test set.
The audio analyzer instrument was closed
automatically by the test set.
Analog audio measurements have been closed by
the test set.
Some setting change has caused the call to
disconnect.
The call processing functions are not active
because the test set is performing calibration
operations.
IQ modulator calibration in progress, X represents
the percent complete.
IQ modulator calibration in progress, X represents
the percent complete.
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_mui.fm
Manual User Error Messages
725