Blackfin/SHARC USB EZ-Extender Interfaces
EZ-Board document to learn how the GPIO signals connect to the
processor.
The USB
signal of the NET2272 controller connects to one of the four
CS
signals on the expansion interface. Refer to the appropriate EZ-Board
AMS
manual to learn how the
signals connect to the processor.
AMS
The jumper settings required for each of the respective EZ-Boards are
described in the readme text files in the
folder of the installation
Examples
directory. The readme file describes the USB software, source code, driv-
ers, and explains how to run a USB-based application.
Blackfin/SHARC USB EZ-Extender Manual
1-3