Table of Contents
Advertisement
ATX Main board
1.4.1
Installing the CPU
1.
Locate the CPU socket on the motherboard.
2.
Press the load lever with your thumb (A), then move it to the left (B) until it is released
from the retention tab.
3.
Lift the load lever in the direction of the
arrow to a 135º angle.
18
Before installing the CPU, make sure that the socket box is facing
towards you and the load lever is on your left.
To prevent damage to the socket pins, do not remove the PnP cap
unless you are installing a CPU.
Advertisement
Table of Contents
