Osd Setup; Osd Setup Menu; Osd Config Sub-Menu - Integra DTR-7.1 Owner's Manual

OSD Setup

5. OSD Setup menu

This menu provides settings for you to customize the on-screen
display (OSD) for the DTR-7.1 by setting different colors or
positions for its display.
Menu
1.Speaker Setup
5.OSD Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
1.OSD Config
5.OSD Setup
2.OSD Setup
3.OSD Position
46
|ENTER| Quit:|OSD|
|ENTER| Quit:|OSD|

5-1. OSD Config sub-menu

Menu
1.Speaker Setup
5.OSD Setup
2.Input Setup
3.Listening Mode Setup
4.Preference
1.OSD Config 5-1.OSD Config
5.OSD Setup
2.OSD Setup
3.OSD Position
a.OSD Output :S Video
|ENTER| Quit:|OSD|
|ENTER| Quit:|OSD|
a. OSD output
This setting allows you to set the output of the ODS Menu. Select
the video terminal to which your monitor is connected: "S
VIDEO" or "VIDEO."
S Video: Outputs the OSD Menu through the S VIDEO
MONITOR OUT terminals.
Video: Outputs the OSD Menu through the VIDEO MONITOR
OUT terminals.
Note:
If the OSD Menu is not displayed on the television monitor you are
using, confirm whether the television is connected to an S VIDEO
MONITOR OUT terminal or VIDEO MONITOR OUT terminal.
Quit:|OSD|