Main Menu; Equipment Status; Filter Pump; Pool Heater On/Off - Polaris PAC PAGAUT Owner's Manual

ENGLISH
Page 12
Section 8. Main Menu
From the Main menu, access commands to turn
equipment on/off, program scheduled times to turn
equipment on/off automatically, and view current operating
status for specific equipment in your configuration.
12:40PM

Filter Pump

Off
Temp Off
Aux 1 Off
Aux 2 Off
Aux 3 Off
Settings >
Devices >
Service Mode >

MAIN MENU

8.1

Equipment Status

If any of the equipment is currently enabled in your
system, the screen alternately displays the Main menu
and the Equipment Status screen.
12:40PM
Filter Pump On
Temp Off
Aux 1 On
Aux 2 On
Aux 3 Off
Settings >
Devices >
Service Mode >
8.2 Filter Pump
MAIN > FILTER PUMP
Turn on Filter Pump whenever you want to filter the pool.
Filter Pump enables the filter pump to circulate water
through the filter and pool heater.
12:40PM
Filter Pump On
Temp Off
Aux 1 Off
Aux 2 Off
Aux 3 Off
Settings >
Devices >
Service Mode >
• When Filter Pump is activated, the Equipment
Status menu is displayed indicating the Filter
Pump is ON.
Equipment Status
Filter Pump
Aux1
Aux2
Equipment Status
Filter Pump
Pool Automation Control | Owner's Manual
Polaris ® PAC ™

Pool Heater On/Off

8.3
MAIN > POOL HEATER
Enable the heater for the pool. Heater will turn on
automatically as long as the filter pump is on and the
water temperature is below the temperature set point.
12:40PM
Settings >
Devices >
Service Mode >
12:40PM
Settings >
Devices >
Service Mode >
• Increase or decrease current pool temperature by
pressing Select to highlight the setting. Press Up/
Down arrows to increase or decrease temperature.
• To turn pool heater OFF, press Select when Pool
Heater is highlighted in the Main menu.

Turn Aux1, Aux2 or Aux3 On/Off

8.4
MAIN > AUX1, AUX2, AUX3
If you have assigned labels to auxiliary
NOTE:
equipment, the label will be displayed in the
Main menu.
Turn ON or OFF auxiliary equipment, for example pool
lights, salt chlorinator, or UV system.
12:40PM
Pool Mode Off
Temp 1 Off
Aux1 Off
Aux2 Off
Aux3 Off
Settings >
Devices >
Service Mode >
Settings
Clock
Schedule
POOL HEAT
Enabled
Set to: 75°F
12:40PM
Pool Mode Off
Temp 1 Off
Aux1 On
Aux2 On
Aux3 On
Settings >
Devices >
Service Mode >